37
TO SET - DIVE TIME REMAINING ALARM
(while in the Surface Mode)
Factory set for 0:00 (minutes), the Dive Time Remaining Alarm
can be set to values between 0:00 and 0:20 (minutes) in increments
of 1 minute.
Press Both buttons simultaneously, release when
SET: 2
ap-
pears.
Press and release the Advance (Front) button, the Units screen
appears with the set point
flashing.
Press the Advance (Front) button
11 more times.
The graphic
dtr
and Alarm and Dive Mode icons appear with
the
Dive Time Remaining
value flashing (Fig. 34).
Press and hold the Select (Bottom) button to scroll through the
Alarm values.
Press the Advance (Front) button to accept the setting and ad-
vance to Set Max PO2 Alarm, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 34 - Set Dive Time
Remaining Alarm
