79
Press and release the Advance (Front) button to accept the setting
and advance to
DEMO: NI-O2
with
CUR
(or
NEW
) flashing
(Fig. 78).
When set for
NEW
, calculations are based on zero residual nitro-
gen and oxygen loading (a clean dive).
When set for
CUR
, calculations take into consideration residual
nitrogen and oxygen remaining from previous actual dives.
Subsequent (repetitive) Simulated dives do not take into consider-
ation previous Simulated dives.
Press and release the Select (Bottom)) button to toggle between
NEW
and
CUR
.
Press and release the Advance Front) button to accept the setting
and advance to
DEMO: PSI
(or
bAr
) with OFF, CYL,
3000
psi
(206.5 bar), or 4000 psi (275.5 bar) flashing (Fig. 79).
When set for
OFF
, no calculations are made and no displays ap-
pear relating to tank pressure.
When set for
CYL
, Air Time Remaining is calculated based upon
actual pressure of the tank that the ATMOS ai is connected to.
When set for
3000
or
4000
psi (206.5/275.5 bar), Air Time Re-
maining is calculated based upon a simulated tank pressure of that
value.
Press and release the Select (Bottom) button to advance through
the set points
OFF > CYL > 3000 > 4000
(206.5 > 275.5).
Press and release the Advance (Front) button to accept the setting
and revert to
Demo Surface Mode
with the DEMO icon flashing.
Fig. 78 - Set Demo Calibration
Fig. 79 - Demo Surface Mode
