27
TO SET - ELAPSED DIVE TIME ALARM
(while in the Surface Mode)
Factory set for 0:00 hr:min, the Alarm can be set to values between
0:10 and 3:00 hr:min in increments of 0:05 hr:min.
Press Both buttons simultaneously, release when
SET: 1
ap-
pears.
Press and release the Advance (Front) button,
FO2
appears
with the value flashing.
Press the Advance (Front) button
2 more times.
The graphic
EdT
, and Alarm and Dive Time icons appear with
the
Elapsed Dive Time
value flashing (Fig. 21).
Press and release the Select (Side) button until the desired
Alarm value appears, or press and hold to scroll through the set
points.
Press the Advance (Front) button to accept the setting and ad-
vance to PC Interface, or press and hold Both buttons for 2 sec-
onds to revert to Surface Mode.
The unit reverts to Surface Mode after 2 minutes if neither but-
ton is pressed.
Fig. 21 - Set Elapsed Time
Alarm
