40
TO SET - BACKLIGHT DURATION
(while in the Surface Mode)
Factory set for 7 (seconds), the Backlight Duration can be set to
values of 0 (button time only), 3, or 7 seconds. This is the length of
time the Backlight will stay on after the button is released.
Press Both buttons simultaneously, release when
SET: 2
ap-
pears.
Press and release the Advance (Front) button, the Units screen
appears with the set point
flashing.
Press the Advance (Front) button
14 more times.
The graphic
GLO
and Time icon appear with the
Duration
value
flashing (Fig. 37).
Press and release the Select (Bottom) button to advance the Du-
ration from :00 to :03 to :07 (seconds)
Press the Advance (Front) button to accept the setting and ad-
vance to Set Sampling Rate, or press and hold Both buttons for 2
seconds to revert to Surface Mode.
Fig. 37 - Set Backlight Duration
