ADTRAN 1202155L1, User Manual

Page: 84 / 146

Chapter 5. Configuration Menu
5-22 TDU 120e User Manual 61202156L2-1
Review Map A (B)
Permits a quick review of the number of DS0s assigned
to each port and the number of unassigned DS0s (
IDLE
or TST ) as defined in the currently applied Map A (B).
Review Temp Map
This menu item is operated the same as R
EVIEW
M
AP
A
(B) .
Edit Temp Map
The map in the TEMP file can be edited to whatever con-
figuration is desired. If Map A had been copied into the
TEMP file, then after editing, the TEMP file could be
applied to MAP A or MAP B.
Apply Temp to Map A (B)
Writes the TEMP map into Map A (B). Apply is usually
the last step in updating a map.
Port Configuration (Port Config)
P
ORT
C
ONFIGURATION
selects and configures the parame-
ters associated with any data port in the unit. For exam-
ple, parameters for the DS-1 (PBX) interface are set
through this menu. The items that can be set depend on
which option module is installed. The list of option ports
will vary with the configuration.
The TDU 120e is designed so that any additional ports de-
veloped in the future will contain the appropriate menu
selections to provide access by using this menu item.
Selecting A
PPLY
T
EMP
M
AP TO
M
AP
A (B) will not disrupt the
operation of unmodified ports.