ADTRAN 1202155L1, User Manual

Page: 121 / 146

Appendix A. Understanding SNMP
61202156L2-1 TDU 120e User Manual A-5
SNMP Trap Configuration
Traps received by the TDU 120e from external units and
the host unit are converted into SNMP traps and forward-
ed to the configured NMS. The source of the trap is
uniquely identified at the NMS by a combination of the IP
address of the TDU 120e, and the Unit ID of the sending
device. The Unit ID is present in the trap packet append-
ed to the end of the trap community packet name, for ex-
ample public.4. It is also included as an Octet String
variable (adProdPhysAddress) in the trap packet as de-
fined in the individual product MIBs. The latest versions
of the product MIBs, by default, display the appended
trap community name in their descriptions.
Typical steps required for Management Station trap con-
figuration are:
1. loading the device specific MIBs, and
2. loading or creating device-specific Trap Definition
Files.
The current product MIBs contain keywords embedded
in comments that can be used by some network manage-
ment platforms to automatically generate Trap Defini-
tions. Otherwise, the descriptions may be used as a
template for Trap Definitions.
If individual option card port and slot identification is re-
quired, it is present in the four-byte
adProdPhysAddress
field of the trap packet. The first two bytes are the Unit ID
of the base controller (least significant byte first). The next
two bytes are port and slot number. This field is the sec-
ond object identifier in all traps sent from TSU/TDU
products. For traps from the ISU 512, the Unit ID is the
first object identifier. See the product MIBs for more infor-
mation.
Definitions for Poll Link Up/Down traps are included in
the TDU 120e MIB file:
TDU 120e.MIB .