Hardware
7
Q7-BASE
2
Hardware
This chapter describes the physical specifications of the interface connectors, headers, LEDs,
and switches on the Q7-BASE. The third section of this chapter further describes the industry
standard IO hardware on the carrier.
2.1
Interface Headers, Jumper Headers, Switches, LEDs, and Connectors
Table 2-1 describes the headers, switches, LEDs, and connectors for the Q7-BASE carrier
shown in Figure 2-1 and Figure 2-3
Table 2-1: Header, Connector, Switch, and LED Descriptions
Header /
Connector#
Signal / Device
Description
AJ1
Audio Jack
13-pin standard audio jack for three HD audio signals: Line
In (Blue), Line Out (Green), and MIC In (Pink)
[FOXXCONN, JA33331-HA1P-4F]
BT1
Battery Socket
3-pin, 220V socket for CR2032 battery that runs at 3V
[LOTES, AAA-BAT-038-K01]
CN1
ATX Power
24-pin, 0.165
"
(4.2mm) ATX standard shrouded connector
for ATX power signals
[ALEX, 9359-24]
CN2
Manufacturing
6-pin, 2mm jumper header reserved for manufacturing use
[JIHVEI, 27S1001-OPS35-01G-B, BLACK]
CN3
ATX / B5V
Standby Select
3-pin, 2.0mm jumper header for selecting ATX or BattMan
+5V Standby mode
[JIH21N12050-03S10B-01G-4/2.8-G]
CN4
ATX / B5V
Power Good Select
2-pin, 2.0mm jumper header for selecting ATX or BattMan
+5V Power Good mode
[JIH21N12050-02S10B-01G-4]
CN5
Smart Battery
10-pin, 2.54 box header for BattMan signals
[JIHVEI, 23N6960-10S10B-01G-G, BLACK]
CN8
Post Code Enable
3-pin, 2.0mm jumper header for enabling or disabling Post
Code 80h / 81h
[JIH21N12050-03S10B-01G-4/2.8-G]
CN10
eDP0
40-pin, 0.5mm right-angle connector for embedded Display
Port I/O (Featured on only the eDP version of the carrier)
[I-PEX, 20455-040E-12]
CN11
eDP1
40-pin, 0.5mm right-angle connector for embedded Display
Port I/O (Featured on only the eDP version of the carrier)
[I-PEX, 20455-040E-12]
CN20
PS/2 Power Source
Select
3-pin, 2.0mm jumper header for selecting PS/2 WAKE
power source
[JIH21N12050-03S10B-01G-4/2.8-G]
CN39
COM1/COM2
Dual 9-pin, 0.109
"
(2.77mm) standard DB9 connectors for
COM1 and COM2 serial ports
[FOXXCONN, DM10151-H531-4F]
CN42, CN44,
CN45
PCI Express
36-pin, 0.039
"
(1mm) standard edge connector for PCI
Express x1 interface
[FOXXCONN, 2EG01817-D2D-DF]
CN46
Digital Audio
4-pin, 0.079
" (2mm) header for incoming and outgoing
SPDIF digital audio signals
[SAMTEC, TMM-102-01-T-D-SM]