ADLINK Technology MPC-8164 User Manual Download

Page: 171 / 311

Motion Creator

159

ORG Distance

: The length when ORG is ON

Position

: Sets the absolute position for Absolute Mode.

This is only available when the Absolute Mode is
selected.

Distance

: Sets the relative distance for Relative Mode.

This is only available when Relative Mode is selected.

10.

Repeat Mode

: When you select On, the motion will

become a repeat mode (forward<->backward or
position1<->position2). This is only available when Rela-
tive Mode or Absolute Mode is selected.

11.

Vel. Profile

: Selects the velocity profile. Both Trapezoi-

dal and S-Curve are available for Absolute Mode, Rela-
tive Mode, and Cont. Move.

12.

Motion Parameters

: Sets the parameters for single axis

motion. This parameter is meaningless if Manual Pulser
Move is selected, since the velocity and moving distance
is decided by pulse input.

Start Velocity

: Sets the start velocity of motion in units

of PPS. In Absolute Mode or Relative Mode, only the
value is effective. For example, -100.0 is the same as

Summary of Contents for MPC-8164
























































































































































































































































































































Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands

ADLINK Technology MPC-8164, User Manual

Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands