ADLINK Technology MPC-8164 User Manual Download

Page: 101 / 311

Operation Theory

The following diagram shows the register data flow of the card.

1. The first motion is executed and the CPU writes corre-

sponding values into Pre-Register2.

_8164_start_ta_move(0,50000.0,100.0,30000.0,0.1,0.0)

2. Since Pre-Register1 and Register are empty, the data in

pre-register 2 is automatically moved to the Register and
executed immediately by the ASIC.

3. The second function is called. The CPU writes the corre-

sponding values into pre-register2.

_8164_start_tr_move(0,20000.0,100.0,30000.0,0.0,0.2)

4. Since Pre-register1 is empty; the data in pre-register 2 is

automatically moved to Pre-Rregister1 and waits to be
executed.

5. You may can execute a 3rd function, and it will be stored

to Pre-register2.

6. When the first function is completed, the Register

becomes empty, and data in pre-register1 is allowed to
move to Register and is executed immediately by the

Summary of Contents for MPC-8164
























































































































































































































































































































Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands

ADLINK Technology MPC-8164, User Manual

Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands