ADLINK Technology MPC-8164 User Manual Download

Page: 169 / 311

Motion Creator

157

fied value. The related functions are:

_8164_set_position()

_8164_set_command()

_8164_reset_error_counter()

_8164_reset_target_pos()

Motion Status

: Displays the returned value of the

_8164_motion_done

function. The related function is

_8164_motion_done()

INT Status

Event

: displays the event_int_status (in hexadecimal).

The related function is

_8164_get_int_status()

Error

: displays the error_int_status (in hexadecimal).

The related function is

_8164_get_int_status()

Count

: total count of interrupt.

Clear Button

: clears all INT status and counter to

Velocity

: The absolute value of velocity in units of PPS.

The related function is

_8164_get_current_speed()

Show Velocity Curve Button

: Opens up a window

showing a velocity vs. time curve. In this curve, every
100 ms, a new velocity data point will be added. Click
the same button to close the window. To clear data, click
on the curve.

Summary of Contents for MPC-8164
























































































































































































































































































































Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands

ADLINK Technology MPC-8164, User Manual

Search results

Summary of Contents for MPC-8164

Reviews:

Related manuals for MPC-8164

Brands by name

Popular brands