“Commission Members” option. Aer a few seconds, both the LonMaker PC and the
GRouter3 devices will turn green.
• You will now be able to install and commission the GR3 routers as 709.1 routers in the
LonMaker network diagram.
3.4. Commissioning GR3 Router With LonMaker
ere are two ways that a network management tool such as LonMaker can communicate with
and commission a GR3 router. e first way is for the network management tool to be connected
to a LON channel that is connected to the LON channel for the GR3. e connection may go
through several other routers. e second way is for the network management tool to be directly
connected to the same 852 IP channel as the GR3 router. In either case once a viable connection
has been established the network management tool may now install and commission the GR3
router into its network diagram
• If the LonMaker diagram already has the IP channel wherein the GR3 is member then go to
the next step. Otherwise, create a new IP channel.
• Create a new TP-10 channel in the LonMaker Visio screen.
• Drag a router device onto the network and uncheck the “Commission Device” box. Set up the
router to communicate between the IP channel and the TP-10 channel.
• Once the device has been set up, right-click the device and select
Commission
. Choose the
Service Pin Install
option. When LonMaker indicates that it is waiting for the service pin, press
SRV P1
on the GR3 router. If the router and LonMaker are communicating properly,
LonMaker will commission the GR3 router, and the router device will turn green in the
LonMaker application. e following screen shots show how this is done.
-59-
Summary of Contents for GRouter3
