2.11. Twin Setup Page
is page configures the twin mode redundant router feature. Twin mode is an optional
enhancement and is not activated in a standard router. If your device does not support redundant
twin mode contact Adept to find out how redundant twin mode might be activated. is page
does not appear if NAT support is enabled. Following is a brief description of each item listed on
the page
Fig.2.21: Twin Mode Setup Page
HeartBeat Time
: is sets the time period in milliseconds between cycles of the twin mode
monitoring packets. e active member of the redundant pair or
active twin
, sends out two round
trip monitoring packets during each
HeartBeat
period that test both the 709.1 and IP interfaces of
both routers. e default is 1000 ms. Increasing the
HeartBeat Time
increases the fail over latency
-51-
Summary of Contents for GRouter3
