•
Infrastructure
: Use this mode for connecting to an access point.
•
Ad hoc (join or create)
: Use this mode for creating an ad hoc network if one does not exist or
joining one that already exists with the chosen SSID
•
Ad hoc (join only)
: Use this mode for joining an existing ad hoc network
SSID
: To change the SSID of the WiFi channel, type the new value into the field provided and
click the
Submit Changes
button.
Channel
: To change the WiFi channel number select it from the popup menu. To search for an
available channel, select
Search
. In search mode, the router will search all channels until it finds
one with the chosen SSID. Select the new value and click the
Submit Changes
button.
WEP
: Select the appropriate radio button. e two choices are Enabled and Disabled. Select the
new value and click the
Submit Changes
button. WEP may not be enabled when WPA is enabled
and vice versa.
Default Key
: WEP stores four different keys that may be used to join a WEP protected network.
Only one key is needed for any network . Select which key from the popup menu and click the
Submit Changes
button.
KEY 0 - KEY3
: To change the WEP Key of the WiFi channel, type the new value into the field
provided and click the
Submit Changes
button. e length of the key may be either 13 Hex digits
(for 64 bit encryption) or 26 Hex digits (for 128 bit encryption). e length needed is determined
by the access point or ad hoc network settings.
WPA
: Select the appropriate radio button. e two choices are Enabled and Disabled. Select the
new value and click the
Submit Changes
button. WEP may not be enabled when WPA is enabled
and vice versa.
Passphrase
: To change the WPA passphrase of the WiFi channel, type the new value into the field
provided and click the
Generate WPA PSK from Passphrase
button. e length of the passphrase
must be between 8 and 63 characters inclusive.
Generate WPA PSK from Passphrase
: is button generates the WPA key from the given
passphrase.
User Name
: To change the WPA logon user name, type the new value into the field provided and
click the
Submit Changes
button.
Password
: To change the WPA logon password for the given user, type the new value into the field
provided and click the
Submit Changes
button.
Submit Changes
: is button updates all the configuration information entered on the current
web page and refreshes the display.
Reboot
: is button performs a so reboot of the main processor on the router. None of the WiFi
parameter changes will be put into effect until aer a reboot. Take care when making changes as
an errant configuration may result in loss of communication and no access to the configuration
pages. e only way to restore communications may be to reset to factory defaults.
-41-
Summary of Contents for GRouter3
