Fig.2.22: Twin Mode Status Page
Twin Mode Redundancy
: is field indicates whether twin mode is enabled or disabled (on/off).
Alarm/Fault State
: is field indicates the status of any alarms or faults.
Failure State
: is field indicates the status of any monitoring failures.
Operational State
: is field indicates the twin mode operational state.
Flags
: is field indicates the twin mode operational state flags for debugging.
Seconds Since Clear
: is field indicates the number of seconds since the statistics were last
cleared.
Arb Count
: is field indicates this device’s arbitration count.
-54-
Summary of Contents for GRouter3
