Fig.1.3: CN to IP Router/Gateway Architecture
e GR3 router also employs a web server for configuration purposes. (See Figure 2.4)
Fig.1.4: GRouter 3 Architecture
1.2. Configuration Parameters
e information required for successful ANSI/EIA 709.1 transport can be broken up into the
following two categories: device parameters and channel parameters.
Device parameters include information such as: IP address, IP port, Name, and Address of
configuration server.
A channel is a logical grouping of LON to IP routers. e minimum requirement for tunneling
ANSI/EIA 709.1 data is the use of two routers. Router A sends data to Router B and vise versa.
However, routers can also send data to more than one router. In such a case, Router A sends data
to Routers B, C, and D, which in turn send data back.
-9-
Summary of Contents for GRouter3
