Ethernet
Ad Hoc Bridge
Fig.2.4: WiFi setup with ad hoc bridge
Computer with WiFi Card
Fig.2.5: WiFi setup with ad hoc WiFi card on PC
Computer with WiFi Card
Access Point
Fig.2.6: WiFi setup with access point and WiFi card on PC
2
.
1.3. Establishing Connection
Once the IP connection (WiFi or Ethernet) is setup, power up the GR3 router. It takes about 60
seconds for the GR3 router to boot up. Boot-up has completed when the yellow User LEDs start
flashing. To verify that the IP connection has been made send an IP ping to the GR3 router
-25-
Summary of Contents for GRouter3
