may be in use by another device. e device must be restarted before changes to the webserver
port will be activated. To change the value, type in the new value and click the
Submit Changes
button and then click the
Reboot
button. A typical alternate web server port is 8080. To access the
web server on any port other than 80, use the following format in the web browser:
http://IP Address:Port
for example
http://10.0.2.40:8080
Reboot
: is button performs a so reboot of the main processor on the router. is is needed for
any of the changes on this page to take effect. When rebooting the Rebooting page will be
displayed (see previous section). Once rebooting has completed re enter the http address and port
for the web server to go back to the home page.
2.5. WiFi Setup Page
For GR3 routers equipped with WiFi IP interfaces the WiFi setup button will appear and will
display the WiFi setup page.
-39-
Summary of Contents for GRouter3
