ADB Safegate IDM 8000, User Manual

Page: 44 / 118

Select Set/Prot to access the protection level displays:
-
-
+
+
+
Figure 8 – Protective displays and menu tree
If password protection is selected from system settings, you are asked for a password before entering the SETTINGS display.
For more information, see selecting password protection in 2.6.8 System settings .
General definitions used in protections setting displays
•
Level A, B : threshold level, meeting the level causes operation of the protective function. Level A (alarm) normally causes shutdown of
the CCR output hereafter called tripping and level B (warning) warning indication.
•
Delay : Delay time after which the protection operates.
•
Nom : Nominal value used for input voltage and frequency protections which are normally set with the dip-switch on the mother board
and are critical for correct operation and lifespan of the CCR. Threshold levels A which trip the CCR are automatically set from these
values and cannot be set directly.
Note : Nominal values must correspond with the values of the mains input. Incorrect nominal value or calibration may cause incorrect
operation of the protection.
IDM 8000
User Interface
32
Copyright
©
ADB Safegate, All Rights Reserved