ADB Safegate FCU-1-in-1, User Manual

Page: 71 / 110

Check if the flasher heads flash at brightness step 1
4. Set the rotary switch SW3 (A) of the LMC PCB to the position 1. Brightness step 1 is now active.
5. Check the status of the LEDs of the equipment cabinet.
•
FCU PCB LEDs: see § FCU - PCB1487 .
•
LMC PCB LEDs: see § Local Master Controller (LMC) - PCB1513 .
Note
For the FCU PCB, check the LEDs through the holes on the cover.
6. Check if the flasher head(s) of the equipment cabinet flash(es) correctly.
Check if the flasher heads flash at brightness steps 2 and 3
7. Set the rotary switch SW3 (A) of the LMC PCB to position 2 and 3.
8. Check if the flasher head(s) of the equipment cabinet flash(es) with the correct intensity.
Finish
9. Select brightness step 1. Set the rotary switch SW3 (A) of the LMC PCB to position 1.
UM-4019_AM02-620e, Rev. 3.0, 2020/05/12 61
Copyright
©
ADB Safegate, All Rights Reserved