ADB Safegate AXON, User Manual

Page: 40 / 88

3. Disconnect the old wire harnesses.
Make sure you dispose the old wire harnesses and use new wire harnesses.
4. Connect the new wire harnesses.
5. Mount the LED bracket with new screws at 26 in-lbs (3 Nm).
6. Close the light.
Note
Refer to the Open and close an 8 ‑ inch Fixture section.
5.3.4 Replace the Light Engine Assembly
Tools to be used:
•
Screwdriver T25 bit
1. Open the light.
Note
Refer to the Open and close a 12 ‑ inch Fixture section.
2. Remove the Light engine(s) (4 pieces M4 screws per light engine assembly).
Make sure you dispose the old screws, light engine(s), and wire harness(es), and the new material.
3. Mount the new light engine(s).
4. Use new screws to attach the light engine in star pattern at 31 inch-pound (3.5 Nm).
5. Retorque the screws in star pattern at 31 inch-pound (3.5 Nm)
6. Close the light.
Note
Refer to the Open and close an 8 ‑ inch Fixture section.
5.3.5 Replace the Prism and its Gasket
Tools to be used:
•
Screwdriver T25 bit
1. Open the light.
Note
Refer to the Open and close a 12 ‑ inch Fixture section.
2. Remove the Light engine (4 M4 screws per light engine assembly).
Make sure you dispose the old screws and use new screws.
AXON Runway Inset Lights
Maintenance
30
Copyright
©
ADB Safegate, All Rights Reserved