ADB Safegate AXON User Manual Download Page 21

Page: 21 / 88

Features and Benefits RG

Efficiency

•

EQ has an integrated ILCMS for LINC 360 system providing high data capacity and resisting degradation from various types

or radio effects to provide a superior communication platform

•

Precision aimed optics enhancing photometric performance and complementing extended LED life

•

Reduced bottom pan profile allowing for very shallow base can installation

•

LEDs pulse width modulated (PWM) at 400 Hz optimizing LED performance and eliminating perceptible flicker to a moving

human observer throughout the range of brightness steps

•

Operates at all steps of constant current regulator technologies designed in compliance with IEC or FAA requirements

•

Fully dimmable lights, conforming to the dimming curve of traditional halogen lights

•

Low protrusion, high-intensity, Style 3 (< 6.35 mm) inset light fixtures

•

No negative slope in front of the prisms

Sustainability

•

Fully encapsulated all-in-one universal power supplies for Runway, Taxiway, Approach and Omni inset families

•

Latest generation LEDs providing a long-lasting light source with high efficiency and low power consumption

•

Reinforced top cover substantially exceeding standards to improve durability and longevity

•

One single family of fixtures covering all runway, taxiway and approach applications

•

IP68 rated enclosure designed for harsh environments; all fastenings are stainless steel

•

Reinforced prism available as an option

•

Compatible with existing infrastructure allowing for direct replacement of existing LED inset fixtures

Safety

•

Improved mechanical design to strengthen and consolidate components, improving the customer maintenance experience

•

Fail-open option for compatibility with legacy monitoring systems and optimization of advanced control/ monitoring systems

•

Failed-LED Detection as required by Engineering Brief 67D

•

Robust lightning protection complying with ANSI/IEEE C62.41-1991; Location Category C2 as required by FAA Eng. Brief 67.

Category C2 is defined as a 1.2/50μS – 8/20 μS combination wave, with a peak voltage of 10,000 V and a peak current of

5,000 A

Common Features and Benefits

Efficiency

•

EQ has an integrated ILCMS remote for use with the LINC 360 system providing high data capacity and resisting degradation

from various types or radio effects to provide a superior communication platform

•

Precision aimed optics enhancing photometric performance and complementing extended LED life

•

Reduced bottom pan profile allowing for very shallow base can installation

•

LEDs pulse width modulated (PWM) at 400 Hz optimizing LED performance and eliminating perceptible flicker

to a moving human observer throughout the range of brightness steps

•

Operates at all steps of constant current regulator technologies designed in compliance with IEC or FAA

requirements

•

Fully dimmable lights, conforming to the dimming curve of traditional halogen lights

•

Low protrusion, high-intensity, Style 3 (≤ 6.35 mm) inset light fixtures

•

No negative slope in front of the prisms

UM-5055, Rev. 1.0.9, 2022/04/29

Summary of Contents for AXON


















































































Search results

Summary of Contents for AXON

Reviews:

Related manuals for AXON

Brands by name

Popular brands

ADB Safegate AXON, User Manual

Search results

Summary of Contents for AXON

Reviews:

Related manuals for AXON

Brands by name

Popular brands