Adaptec Snap Server 700i Series, User Manual

Page: 212 / 236

Available Properties and Values
206 Snap Server 700i Series User’s Guide
Available Properties and Values
Property Values
INSTALLDIR
(Not required) Specifies the installation path. If you are specifying the installation path, it
must be set for a command line install, and must be enclosed in escaped
quotation marks.
For example:
INSTALLDIR=\"C:\Program Files\Adaptec\Adaptec Storage Manager\"
Note: If you do not explicitly set the installation path, the default path is
"C:\Program Files\Adaptec\Adaptec Storage Manager"
USERNAME
(Required)* Specifies the log-in user name for the Management Service.
*This Property is required only if the Management Service feature is
installed.
PASSWORD
(Required*) Specifies the log-in password for the Management Service.
*This Property is required only if the Management Service feature is
installed.
MGMTLOC
(Required*) Specifies the location of the local or remote Management Service to allow
access for VDS/VSS. This value should be the local computer name, not
“localhost”.
*This Property is required only if VDSExternal or VSSExternal features are
installed.
MGMTUSER
(Required*) Specifies the Management Service log-in user name to set up VDS/VSS
access. If you are installing the Management Service onto the local
computer, this value is the same as the USERNAME property.
*This Property is required only if VDSExternal or VSSExternal features are
installed.