manualshive.com logo in svg

Adaptec Snap Server 700i Series, User Manual

The Adaptec Snap Server 700i Series is a reliable and high-performance network storage solution. Enhance your understanding of its features and functionalities with the comprehensive Service Manual, available for free download at our website. Access it today to maximize the potential of your Snap Server 700i Series.

Share
Download
background image

Monitoring Your GuardianOS-Powered Snap Servers

130 Snap Server 700i Series User’s Guide

2

Deselect 

Enable discovery at remote servers

, then click 

OK

.

Remote discovery is disabled. All GuardianOS-powered Snap Servers on remote 

subnets appear offline in Adaptec Storage Manager. (This may take a few 

minutes.)

3

To remove offline GuardianOS-powered Snap Servers from Adaptec Storage 

Manager, see page 129.

Opening the GuardianOS Administration Tool

You can view and modify the GuardianOS by launching the Web-based 

Administration Tool from Adaptec Storage Manager.
To open the GuardianOS Administration Tool, in the Enterprise View, right-click 

the server you want, then select 

Administer this server

. (You can also access the 

Administration Tool by right-clicking the server in the Network Attached Storage 

View and selecting 

Administer this server

.

The GuardianOS Administration Tool opens. For more information about the 

GuardianOS, and for instructions on using the Administration Tool, refer to the 

Snap 

Server Administrator Guide

 on the User CD or the Administration Tool online Help.

Changing the Network Attached Storage Management Settings

You can change these Network Attached Storage management settings to suit your 

requirements:
• Specify the Web browser for the Administration Tool (see page 131)
• Set the period after which a server is considered offline (see page 131)
• Specify whether Adaptec Storage Manager displays a warning if any server's 

Ethernet ports have no link (see page 131)

• Instruct Adaptec Storage Manager to directly scan all servers (see page 132)
• Configure an HTTP proxy server for online registration (see page 132)

A white 
status icon 
indicates an 
offline 
server

Summary of Contents for Snap Server 700i Series













































































































































































































































Reviews:

No comments

Related manuals for Snap Server 700i Series

IBM 5100 Installation Manual preview
5100
Brand: IBM Pages: 64
Zhone 6211 Product Manual preview
6211
Brand: Zhone Pages: 7
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Brand: Draytek Pages: 8
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Brand: Watchguard Pages: 40
Quantum StorNext QD7000 Manual preview
StorNext QD7000
Brand: Quantum Pages: 29
IBM eServer 130 xSeries User Reference Manual preview
eServer 130 xSeries
Brand: IBM Pages: 156
Xycom XVME-979 Manual preview
XVME-979
Brand: Xycom Pages: 27
Amer.com 8-Port 10/100Mbps Fast Ethernet Switch User Manual preview
8-Port 10/100Mbps Fast Ethernet Switch
Brand: Amer.com Pages: 14
W&T Com-Server++ Manual preview
Com-Server++
Brand: W&T Pages: 228
STONEFLY USO-HA D500 Series Setup Manual preview
USO-HA D500 Series
Brand: STONEFLY Pages: 58
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50
Airlinkplus UG-ASW232-1103 User Manual preview
UG-ASW232-1103
Brand: Airlinkplus Pages: 24
Alphacool HDX PRO WATER Quick Start Manual preview
HDX PRO WATER
Brand: Alphacool Pages: 2
Quantum RDX 8000 Quick Start Manual preview
RDX 8000
Brand: Quantum Pages: 45
IBM 10/20 GB TR-5 User Manual preview
10/20 GB TR-5
Brand: IBM Pages: 36
SMC Networks Barricade g SMC2804WBRP-G Quick Installation Manual preview
Barricade g SMC2804WBRP-G
Brand: SMC Networks Pages: 53
D-Link DSL-X1852E User Manual preview
DSL-X1852E
Brand: D-Link Pages: 141

Brands by name

Popular brands

Load more brands