Adaptec Snap Server 700i Series, User Manual, Page: 86 / 236

Limiting User Access to Your IP SAN with the Security Manager
80 Snap Server 700i Series User’s Guide
Modifying the Authentication Settings
You can add authentication, change authentication methods, or remove
authentication from any provisioned volume or logical device. You can change the
access settings for any provisioned volume or logical device.
To change an authentication setting:
1
In the Logical Devices View, right-click the words
Logical devices
, then select
Modify logical devices
.
The wizard opens.
2
Change the authentication settings as required. (For more detailed instructions,
see Step 7 of “Provisioning Storage Manually” on page 42.)
3
Click
Next
to continue, click
Next
again, then review the configuration summary.
Click
Back
to change the configuration.
4
Click
Apply
, then click
Yes
.
The authentication settings are modified.
Limiting User Access to Your IP SAN with the Security
Manager
To protect your IP SAN, you can use Adaptec Storage Manager’s Security Manager
to control which users can access and modify your iSCSI storage.
Each Adaptec Storage Manager user is given a password and is assigned one of two
access privilege levels, Administrator level or Operator level (see page 81). To access
Adaptec Storage Manager and your IP SAN, the user enters his or her password
when logging in to the Management Service (see Step 2 on page 35).
Note
Multiple users can be logged into the same Management Service at the same time.
A user is associated with a specific Management Service. If your IP SAN includes
more than one Management Service, you can:
• Add the same user to all Management Services, or limit that user to specific
Management Services only.
• Assign the same user different privilege levels on different Management Services.
Right-click here