Adaptec Snap Server 700i Series, User Manual

Page: 116 / 236

Monitoring Jobs in Progress
110 Snap Server 700i Series User’s Guide
The job’s status is reported in the top half of the window, as shown in the previous
figure. A job’s status can be:
•
Running
—Job is in process and progressing normally.
•
Attention
—Job has failed.
•
Rolling back
—Completed steps are being undone.
•
Cancelling
—Job is being cancelled (the
Quit job
button has been clicked).
You can use Adaptec Storage Manager to monitor and manage jobs in progress:
• To open the Job Manager, see page 110.
• To cancel a job in progress, see page 110.
• To resume a cancelled job, see page 111.
• To undo a failed job, see page 111.
Opening the Job Manager
You can open the Job Manager at any time to monitor and manage jobs that are
currently in progress. (This includes scheduled jobs that have begun.)
To open the Job Manager:
1
In the Enterprise View, select the Management Service.
2
In the
Configure
menu, select the Management Service you want, then select
Jobs
.
The Job Manager opens on the Security tab of a new window (see the figure on
page 109), showing all running jobs.
3
Select any job to view its progress. Close the Jobs window when you’re done.
Cancelling a Job in Progress
You can cancel a job in progress unless the job is in Attention status. (A job in
Attention status must be undone , not cancelled. See page 111.) You might want to do
this if the job requirements have changed, or if the job is no longer required.
Cancelling a job does not undo any steps that have been completed. To undo a job,
see page 111. You can resume a job that is being cancelled in the Job Manager (see
page 111)—once a job is fully cancelled, it can’t be resumed.
To cancel a running job:
1
Open the Job Manager (see page 110).
2
Select the job you want to cancel, click
Quit job
, then click
Yes
to cancel the job.
The job’s status changes to Cancelled.
To resume a job that is in the process of being cancelled, see page 111.