manualshive.com logo in svg

Adaptec Snap Server 700i Series, User Manual, Page: 83 / 236

Share
Download
Adaptec Snap Server 700i Series User Manual Download Page 83

Snap Server 700i Series User’s Guide

77

Chapter 7

Controlling Access to Your IP SAN

This chapter describes how to use Adaptec Storage Manager to restrict and control 

access to your IP SAN and iSCSI targets (logical devices) with auto-discovery 

control lists, authentication, and the Security Manager.

Limiting Discovery of iSCSI Targets with Auto-discovery 

Control Lists

If you want to limit which iSCSI initiators can discover an iSCSI target (logical 

device), you can create an auto-discovery control list which will allow one or more 

specified iSCSI initiators to discover an iSCSI target while preventing other iSCSI 

initiators from discovering it, as illustrated in this figure.

Each iSCSI target can have its own auto-discovery control list, with specified iSCSI 

initiators that are permitted to discover it. 

Note  

Auto-discovery control lists don’t prevent iSCSI initiators from logging into 

iSCSI targets that aren’t on their control lists. If you are using iSNS to discover iSCSI 

targets and want to control which logical devices are logged into by which iSCSI 

initiators, you must set CHAP authentication. Without CHAP authentication, all 

iSCSI initiators will be able to log in to all iSCSI targets. See “Controlling Access to 

Your IP SAN with Authentication” on page 79 for more information.

iSCSI

Auto-discovery control

list denies discovery to

Initiator B

Auto-discovery control list 
allows Initiator A to 
discover target

iSCSI Initiator A

iSCSI Initiator B

iSCSI Target

Summary of Contents for Snap Server 700i Series













































































































































































































































Reviews:

No comments