manualshive.com logo in svg

Adaptec Snap Server 700i Series, User Manual

The Adaptec Snap Server 700i Series is a reliable and high-performance network storage solution. Enhance your understanding of its features and functionalities with the comprehensive Service Manual, available for free download at our website. Access it today to maximize the potential of your Snap Server 700i Series.

Share
Download
background image

Available Properties and Values

Appendix F  Completing a Silent Windows Installation

207

ADDLOCAL
(Required)

Note: Use commas to separate multiple values.
l ALL—Installs all of the following features. If you specify ALL, do not also 

specify any of the following values.

l Agent—Installs the Adaptec Storage Manager Direct Attached Storage 

Agent. If this feature is installed, the machine will reboot if certain RAID 

controllers that use the filter driver are installed. If necessary, use the 

REBOOT property to suppress this.

l ASMReadme—Installs the Readme file in its Start menu shortcut.
l CLITools—Installs the Command Line Interface tool.
l Console—Installs the Adaptec Storage Manager GUI.
l DSM (Windows 2000 and Windows Server 2003 x86 or x64 only)—

Installs the MPIO DSM. Currently, the MPIO DSM CAN NOT BE 

INSTALLED SILENTLY; user intervention is required to begin the DSM 

driver installation and to reboot following installation. If necessary, use 

the REBOOT property to suppress this. This value is supported by 

Windows 2000 and Windows Server 2003 x86 only.

l ManagementService—Installs the iSCSI Storage Management Service. 

Requires you to set user name and password properties.

l SNMP Support—Installs SNMP support for Adaptec Storage Manager. 

Requires the Agent feature to be installed, also. If you select the 

SNMPSupport feature, the Agent feature is automatically included, even 

if you don’t specify it.

l VDSExternal (Windows Server 2003 R2 x86 only)—Installs support for 

VDS for iSCSI storage. Requires Microsoft iSCSI Software Initiator v.2.02 

or higher. Also requires that you also set the MGMTLOC, MGMTUSER, 

and MGMTPASS properties.

l VDSProvider (Windows Server 2003 x86 only)—Installs support for VDS 

for direct attached storage RAID controllers.

l VSSExternal (Windows Server 2003 R2 x86 or x64 only)—Installs 

support for VSS. Requires Microsoft iSCSI Software Initiator v.2.02 or 

higher. Also requires that you also set the MGMTLOC, MGMTUSER, and 

MGMTPASS properties.

l WinAgent (Windows Server 2003 x86 only)—Installs the iSCSI Storage 

management agent. Requires Microsoft iSCSI Software Initiator v.2.02 

or higher. Also requires that the DSM and VSSExternal features also be 

installed.

Property

Values

Summary of Contents for Snap Server 700i Series













































































































































































































































Reviews:

No comments

Related manuals for Snap Server 700i Series

Mako 6500 Setup & Configuration Instructions Manual preview
6500
Brand: Mako Pages: 56
NComputing L130 User Manual preview
L130
Brand: NComputing Pages: 95
IBM 8275-416 Quick Reference Card preview
8275-416
Brand: IBM Pages: 8
Samsung MZ-5PA064B Manual Rápido Del Usuario preview
MZ-5PA064B
Brand: Samsung Pages: 14
Samsung MZ-5PA064B Quick User Manual preview
MZ-5PA064B
Brand: Samsung Pages: 14
Samsung 840 EVO Technical Specifications preview
840 EVO
Brand: Samsung Pages: 4
Yamaha MCX-2000 - MusicCAST Digital Audio Server Owner'S Manual Addendum preview
MCX-2000 - MusicCAST Digital Audio Server
Brand: Yamaha Pages: 25
IBM DJNA-351010 Quick Installation Manual preview
DJNA-351010
Brand: IBM Pages: 2
Husky 1002751097 Use And Care Manual preview
1002751097
Brand: Husky Pages: 10
MSI MS-9238 User Manual preview
MS-9238
Brand: MSI Pages: 107
SanDisk 175972 User Manual preview
175972
Brand: SanDisk Pages: 2
Cabletron Systems SmartSwitch 8-slot User'S Reference Manual preview
SmartSwitch 8-slot
Brand: Cabletron Systems Pages: 150
IBM H SERIES RS/6000 Installation And Service Manual preview
H SERIES RS/6000
Brand: IBM Pages: 424
Ubiquiti UniFi UAS-PRO Quick Start Manual preview
UniFi UAS-PRO
Brand: Ubiquiti Pages: 28
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8
l-com IES-2205 User Manual preview
IES-2205
Brand: l-com Pages: 11
Archos ARCFlash User Manual preview
ARCFlash
Brand: Archos Pages: 12
Western Digital WD2503ABYZ Specifications preview
WD2503ABYZ
Brand: Western Digital Pages: 2

Brands by name

Popular brands

Load more brands