Adaptec Snap Server 700i Series, User Manual, Page: 162 / 236

Configuring iSNS with the CLI
156 Snap Server 700i Series User’s Guide
3
Log in to the CLI as Administrator, using the password you set in “Step 2:
Configuring the iSCSI Storage Appliance” on page 36. If you didn’t set a
password, use the default password,
admin
.
4
Enter:
isns
5
Enter:
server IP_address
Where
IP_address
is the address of the iSNS server (see Step 1).
6
To exit the CLI, enter:
end
quit
Note
For more information about the CLI, see “Using the CLI” on page 177.
7
Configure iSNS in the iSCSI initiator.
You will need to configure the initiator and add an iSNS server to complete the
configuration of iSNS.
For example, from a Windows client:
• When using the Microsoft initiator, run the Microsoft initiator software, select
the iSNS Servers tab, and click
Add
. Enter the name or address of the iSNS
server, and then click
OK
.
• When using the QLogic4050/4052 initiator, right-click the QLogic adapter and
select
Properties
. Select the Discovery Configuration tab, and check
Perform
Discovery
. Check
Use iSNS Server
, enter the server name or IP Address, and
click
OK
.
Note
After you have completed this procedure, all the iSCSI targets on the iSCSI
Storage Appliance automatically appear in the Microsoft Initiators target list.