ADAMEX ALEX, Manual

Page: 17 / 28

locking is automatic. In order to dismount the sport seat, get
hold of the hitches on both sides of the sport seat, press the
longitudinal push buttons located there and while still holding
them, pull the sport seat up (fig. 19).
ADJUSTMENT OF THE SPORT SEAT BACKREST
The backrest is adjusted in 4 positions. We raise it by lifting it to
the required position (fig. 20). In order to lower the backrest,
pull the handle at the back of the sport seat and adjust the
required position
(fig. 21).
CAUTION! While adjusting the sport seat backrest, pay
particular attention to the hands and head of the child.
SPORT SEAT CANOPY
The sport seat is equipped with the removable canopy. In order
to dismount it, insert its hitches into the handles intended for
this purpose on both sides of the sport seat chassis
(fig. 22). In
order to remove the canopy, press the hitches on both sides of
the sport seat and remove them from the slots (
fi g. 23). The
canopy is equipped with the handle that is used for transferring
and with the sun roof folded to the inside. Only part of the
upholstery of the canopy may be removed by undoing the
zippers, owing to which the ventilation space is increased
(fig .
24) Adjustment (fig. 25)
SPORT SEAT COVER
The sport seat is equipped with the cover, which is to be
mounted by attaching its snaps to the snaps located on both
sides of the canopy (fig. 26).
FOOTREST
The footrest is equipped with the height adjustment function. In
order to raise the footrest, lift it up
(fig. 27). In order to lower the
footrest, press and hold the push buttons on both sides of the
footrest and adjust the required position
(fig. 28).
BUMPER
The sport seat is equipped with the safety bumper. We mount it
by inserting its hitches into the slots intended for this purpose
on both sides of the sport seat
(fig. 29). In order to remove the
bumper, press the red push buttons on the outer side of the
sport seat sides and take out the bumper from the slots
(fig.30).
CAUTION! Always use the bumper together with the crotch
strap, when the child is placed in the sport seat.
SAFETY BELTS
CAUTION! Always use the safety belts when the child is
placed in the sport seat. The pram is equipped with 5-point
safety belts. After placing the child in the sport seat, fasten the
belts, pressing their forks into the central clasp (fig. 31), and
then tighten the belts in buckles. In order to release the belts,
press the forks in and remove from the clasp
(fig. 32).
RAIN COVER AND MOSQUITO NET
The pram is equipped with a universal rain cover placed on the
carry cot or sport seat. As part of the equipment, also a
separate mosquito net and a rain cover are available
(figs. 33
and 34).
BAG
The pram is equipped with a bag for accessories. We attach it
to the pram guide by means of clips
(fig. 35).
CAR SEAT
CAUTION! In order to mount the car seat on the pram, fi rst fi t
in the adapters into the pram slots.
CAUTION! Before mounting the car seat, make sure that the
adapter is mounted correctly on the pram chassis.
CAUTION! The car seat is intended for children with the body
mass up to 11 kg.
MOUNTING AND DISMOUNTING OF THE CAR SEAT
ADAPTERS
Fit the adapter into slots on both sides of the pram until an
audible click is heard
(fig. 36). The adapter is dismounted in the
same manner as the carry cot.
MOUNTING AND DISMOUNTING OF THE CAR SEAT.
In order to mount the car seat, attach it to the adapter slots (fig.
37). In order to remove the car seat, pull the levers on its both
sides and pull the car seat up
(fig. 38).
CAUTION! Before proceeding with the use of the pram make
sure that the car seat is mounted properly.
COVER AND CANOPY OF CAR SEAT
The car seat is equipped with a canopy and a cover, which are
mounted by means of a zipper
(fig. 39,40).
ADJUSTMENT OF THE CAR SEAT HANDLE
The adjustment is made by pressing red push buttons on both
sides of the car seat, and then by moving the handle to the
required position (fig. 41). The detailed instructions for
mounting the car seat in a car are attached to the car seat.
VENTILATION OF THE CARRY COT
In order to open the carry cot ventilation, move the grille to the
right
(fig. 43). In order to close the ventilation, turn the grill anti-
clockwise (fig. 44).
LOCKED SHOCK ABSORBER
The method of locking/unlocking the shock absorber is
illustrated by (fig. 45).
Fig. 46: Gloves attached to the handle Fig. 47 “window” in the
cover