700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
30 of 56
6.3.6
INSTALL the operator mounting bracket cover over the operator mounting bracket.
6.4
Installing
the Door Operator
6.4.1
REMOVE the two capscrews securing the operator bottom cover to the operator.
6.4.2
REMOVE the bottom cover from the operator.
6.4.3
SLIDE the battery pack from the operator and REMOVE the battery pack.
6.4.4
REMOVE the dress cover from the operator.
WARNING
To avoid inadvertent activation of the operator during connection of the door arm, the battery pack should
not be installed until
after
the door arm is connected.
6.4.5
Refer to Figure 20, and, with the battery pack facing the jamb, POSITION the operator
onto the operator mounting pins. ENSURE operator does not slide off the mounting pins.
6.4.6
INSTALL and TIGHTEN the two ¼-20 X 1½″ socket head capscrews securing the
operator to the operator mounting pins.
Figure 20. Installing the Operator
