700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
25 of 56
6.
OPERATOR AND DOOR ARM INSTALLATION INSTRUCTIONS—PULL-SIDE APPLICATIONS
NOTE
A
pull-mount operator
always mounts on the outside (pull-to-open) of the door
at the hinge or pivot
edge
of the top rail.
The template provides for Right Hand door mounting on one side and Left Hand door mounting on the
opposite side.The template provides two additional hole slots. These can be used when the solid-line
outline or dotted-line outline mounting holes will interfere with a top rail web, rail-to-stile tie rod(s), or the
rail-to-stile junction.
6.1.1
SELECT the right hand or left hand side of the operator mounting template as applicable.
6.1.2
DETERMINE the type of mounting hinge (butt, continuous, or offset).
CAUTION
On an aluminum storefront door, the operator mounting holes must
not
be drilled into the top rail web, rail-
to-stile tie rod(s), or the rail-to-stile junction.
6.1.3
If the door is an aluminum storefront door, EXAMINE the top rail and, when drilling the
mounting holes, ENSURE the following:
Do not
drill into the top rail web
Do not
drill into the rail-to-stile tie rod(s)
Do not
drill into the rail-to-stile junction
