700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
21 of 56
5.3
Installing the Door Operator
5.3.1
Refer to Figure 13, and INSTALL the operator mounting bracket cover over the operator
mounting bracket.
5.3.2
REMOVE the two capscrews securing the operator bottom cover to the operator.
5.3.3
REMOVE the bottom cover from the operator.
5.3.4
SLIDE the battery pack from the operator and REMOVE the battery pack.
5.3.5
REMOVE the dress cover from the operator.
WARNING
To avoid inadvertent activation of the operator during connection of the door arm, the battery pack should
not be installed until
after
the door arm is connected.
5.3.6
With the battery pack facing the jamb, POSITION the operator onto the operator
mounting pins. ENSURE the operator does not slide off the mounting pins.
5.3.7
INSTALL and TIGHTEN the two ¼-20 X 1½″ socket head capscrews securing the
operator to the operator mounting pins.
Figure 13. Installing Operator Mounting Bracket Cover
