700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
8 of 56
4.1.1
Door Operator Assembly: Includes the following major assemblies:
Door Operator: Contains the mechanical components required to move the door.
The operator assembly mounts on the hinge or pivot edge of the door and top rail
and includes the motor/gearbox, door arm, mounting brackets, regenerative power
source, battery pack, and cover.
Door Controller: Contains the hardware and software necessary to control the
motion of the door. Figure 3 illustrates the door controller circuit board controls
and indicators.
4.1.2
Transmitter: An external device that emits an rf signal or an electrical signal to operate
the door. When pushed once, the door opens. The transmitter has a range of 85
(26 m)
Figure 3. Door Controller Circuit Board Controls and Indicators
