700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
40 of 56
7.5.2
If thespring tension needs to be adjusted, refer to Figure 32, and ADJUST door-open
spring tension as follows:
a.
INSERT
3
/
16
″ (4.762 mm) hex wrench into spring tension setscrew.
If the door feels too light, using the
3
/
16
″ (4.762 mm) hex wrench, TURN the
setscrew in the end of the operator
clockwise
to
increase
spring tension.
If the door feels too heavy, using
3
/
16
″ (4.762 mm) hex wrench, TURN the
setscrew in the end of the operator
counterclockwise
to
decrease
spring tension.
8.
PROGRAMMING INSTRUCTIONS
NOTE
The instructions for linking the RF pushbuttons and customizing the operator settings are common
regardless of whether the door is a push or pull application.
8.1
Programming the Operator
8.1.1
Perform a RESET to ensure control memory is clear.
PRESS and HOLD the “ENTER” button,
Figure 30. Adjusting Door Spring Tension
NOTE: CLOCKWISE ROTATION
INCREASES SPRING TENSION
