700002 Rev. F
© 2012 ADA EZ. ALL RIGHTS RESERVED.
37 of 56
7.3
Installing the Optional Plug-In
Transformer
NOTE
If possible, the transformer wiring should be routed against the door trim molding.
7.3.1
ROUTE transformer wiring to a 110-VAC outlet, but do
not
plug transformer into the
outlet.
NOTE
An optional plug-in transformer is recommended in installations where the automatic door-opening feature
will be used frequently. The optional plug-in transformer is REQUIRED for installations where Power
Close and/or Push and Go features are enabled.
7.3.2
Refer to Figure 28, and ROUTE wires through armored cable end links. MOUNT the
door cord end links as follows:
MOUNT one end link in the area behind or next to the battery pack.
MOUNT the other end link on or next to the door frame.
Figure 28. Routing Wires through Cable End
Links
