ActionTec PC-250, User Manual

Page: 82 / 85

Index
Page 82
Message Resolution
Can’t write boot block.
There is a problem formatting
the card, it may be full, its data
corrupted or defective, or you
may have specified the wrong
card.
Can’t write directory.
See “Can’t write boot block”
above
Can’t write FAT.
See “Can’t write boot block”
above
Can’t write root dir.
See “Can’t write boot block”
above
Can’t write subdir.
See “Can’t write boot block”
above
Cannot open filename .
The copy utility could not access
the file
filename . It may be
inaccessible due tits DOS file
attributes. Make sure that you
can access the file, then retry the
operation.
Card is write-protected.
Remove write protection and try
again.
CardTalk driver version for
socket
number must be at
least V2.20.15 or V.3.01.
The version check has
determined that the version of
CARDTALK.SYS being used
for the socket identified by
number
is older than V2.20 or
V3.01. Contact Databook to
receive an upgrade.
CardTalk must be first Card
Services client.
The Super Client driver,
CARDTALK.SYS, must be the
first client driver in the
CONFIG.SYS file. See the
Chapter 6,
Cards that Require
Additional Drivers .
CARDTALK.DBK version must
be at least V2.0.15 or V3.01.
Contact The Manufacturer to
receive an upgrade.