PC-250, PC-260, and PC-300 User’s Guide
Page 19
Installing the Hardware
This chapter provides detailed steps for installing the Card Reader and
configuring its options. Refer to your computer owner’s manual for an
explanation of how to remove the cover of the computer and install
expansion boards.
Preparation
Before you install the Card Reader, take a moment to prepare the
computer and the tools you will need.
Read the License Agreement and Register
1. Read the License Agreement at the beginning of this manual.
2. Locate the serial number on the ISA Bus Board and the software
version number on the CardTalk distribution diskette.
3. Fill in the registration card including the serial number and version
of software.
4. Mail the Registration card to The Manufacturer.
By mailing in your Registration Card, you become eligible for
telephone technical support, access to The Manufacturer’s Bulletin
Board System (BBS), new product and upgrade announcements,
and application notes as they become available.
Prepare Tools
You may need:
•
A long nose pliers to change the jumper setting
•
A Phillips head and/or a flat head screwdriver to install the ISA Bus
Board and the Card Socket Module
Summary of Contents for PC-250
Page 32: ......
