Index
PC-250, PC-260, and PC-300 User’s Guide
Page 79
two beeps
CARDTALK.SYS does not recognize the card and
assumes it is an uninitialized memory card. If the card
is a memory card, the card may be unformatted. To
format the card, use the CardTalk Control Panel or, for
DOS users, the TC utilities.
The following cards cause two beeps during normal
insertion:
SCSI
Network cards
Sound cards
any card requiring a Card Services client driver or
enabler.
This is because CardTalk cannot configure these cards
without the third party software, which must be
installed separately and/or run by you.
three
beeps
CARDTALK.SYS recognizes the card, but
initialization has failed. This is usually because some
system resource necessary to support the card is not
available. For example, no COM ports are available
(MS-DOS already has four COM ports assigned).
Summary of Contents for PC-250
Page 32: ......
