Installing the Software
PC-250, PC-260, and PC-300 User’s Guide
Page 37
NOTE
ATA Compatibility
If your I/O Controller in your system is capable of
configuring multiple IDE(AT) drives, then you must
change the default ATA address to something other
than 170 (preferably to 160).
Adding Microsoft Flash File System
INSTALL asks if you want to add the Microsoft Flash (FFS2) card
driver.
To omit the driver, highlight WITHOUT Microsoft Flash File System
(FFS2) and press
Enter
. To include the FFS2 driver, highlight WITH
Microsoft Flash File System (FFS2) and press
Enter
.
NOTE:
Needed Drivers
Add the driver only if you plan to use a Flash card
with Microsoft’s Flash file system (FFS2). FFS2
allows you to delete and edit files on a Flash card.
Solid State ATA cards do not require this driver.
FAT/Flash “TCXCOPY” formatted cards also do not
require FFS2.
Enabling the Annunciator
INSTALL describes the sounds CardTalk can produce when you insert
a PC Card. This capability is called the Card Insertion Annunciator.
INSTALL asks if you wish to enable the annunciator.
This feature causes the computer to output an audible “beep” through
the system speaker when you insert a PC Card. If the card requires only
CARDTALK.SYS, one beep means CardTalk recognizes the card. The
card is ready to use. Two or more beeps may indicate an error
condition. Refer to Chapter 6,
Troubleshooting
for more information on
what the beeps mean. Cards that require additional drivers may beep or
Summary of Contents for PC-250
Page 32: ......
