Installing the Hardware
Page 20
•
A flat head screwdriver to mount the rails, if you’ll be using a 5.25”
bay (Check with your PC dealer for a 5.25” mounting kit).
If your computer uses specialized screws and connectors, you may need
special tools to disassemble it. Refer to your computer owner’s manual.
Disassemble the Computer
Before you can install the board in your computer, you need to
determine if there will be an address conflict with any other device in
your computer.
1. Turn the computer and all peripheral devices off.
2. Unplug the computer power cord from the wall receptacle.
3. Remove the computer’s cover. Refer to your computer owner’s
manual for instructions.
WARNING
Conflicts
Make sure each board in your system has its own
unique address. If a conflict exists, your system will
hang.
4. Examine all other expansion boards in your PC and determine the
I/O address each uses. Refer to the manual that came with each
board for help. The default I/O base address for the Card Reader is
240h. If another device is already using this address you will have to
change the address used by the Card Reader, or change the address
used by the other device.
Summary of Contents for PC-250
Page 32: ......