Index
PC-250, PC-260, and PC-300 User’s Guide
Page 81
Message
Resolution
Can’t find file.
A failure occurred while Card
and Socket Services software
was accessing a file. Retry the
operation. It may be necessary to
reboot the system, or, if the card
data has somehow been
damaged, to reformat the card.
Can’t find system files.
The formatter cannot create a
system disk because it cannot
find the required files to copy to
the disk. Reinstall CardTalk and
try again. This may have to do
with the default drive selection
during the format operation.
Can’t format card.
The card cannot be formatted
because the wrong card has been
specified, the card is defective,
there is a configuration problem
or there has been a hardware
failure. Verify that the overall
installation was successful and
correct using the CTALKID
program.
Can’t make dir.
TCXCOPY cannot create a
directory or subdirectory as
needed. The card may be full, or
have failed.
Can’t make subdir.
See “Can’t make dir” above.
Can’t read boot block.
The formatting program cannot
access the boot record on the
system’s default drive. Check
which drive you are logged into
when running the format utility.
Can’t read FAT.
See “Can’t read boot block”
above.
Summary of Contents for PC-250
Page 32: ......
