PC-250, PC-260, and PC-300 User’s Guide
Page 33
3
Installing the Software
This chapter explains how to install the CardTalk drivers and the
CardTalk Control Panel on your system. It describes the CardTalk files
and lists the device driver lines the installation program changes in your
configuration files.
The CardTalk software installation is completely automated using the
INSTALL program.
CAUTION
Use INSTALL at the MS-DOS Prompt
Do not install CardTalk from a DOS window within
Windows. Exit Windows before installing CardTalk.
Windows must not be running during the installation.
INSTALL asks several questions about how you want to install
CardTalk and then automatically decompresses and copies the needed
files to your hard disk. INSTALL can automatically modify your
configuration files (CONFIG.SYS and AUTOEXEC.BAT) if you
choose, so the necessary files are loaded into memory each time you
start your computer.
If you already have CardTalk on your system, follow the procedures in
this chapter to upgrade the software.
CAUTION
Compressed Files
The CardTalk files on the installation diskette are
compressed. You must use the INSTALL program to
copy them to your hard disk.
Summary of Contents for PC-250
Page 32: ......
