![background image](http://html1.mh-extra.com/html/actiontec/pc-250/pc-250_user-manual_2843226043.webp)
Installing the Software
PC-250, PC-260, and PC-300 User’s Guide
Page 43
To approve the changes, type
Y
. To make the changes manually,
type
N.
3. INSTALL displays the lines it is adding to your CONFIG.SYS file:
Device driver line
Discussion
\CARDTALK\TMB250.SYS
This Socket Services driver is
required.
\CARDTALK\CTALKCS.EXE
This Card Services driver is
required.
\CARDTALK\CARDTALK.SYS
This Super Client driver is
required.
\CARDTALK\MS-FLASH.SYS
This Flash File System driver is
optional
4. Press any key to complete the installation.
5. After installing the software, you must restart your system for
changes in your configuration to become effective.
You can manually modify the configuration of the drivers by editing the
configuration files yourself.
NOTE
Restoring Your Previous Configuration
INSTALL also tells you how to remove the CardTalk
drivers and restore your previous configuration, if an
error occurs and you want to start again.
Verify the Installation
When you restart the system, the CardTalk briefly displays a number of
messages. This section explains how to run CTALKID to to verify that
each socket is working properly.
Summary of Contents for PC-250
Page 32: ......