Installing the Software
PC-250, PC-260, and PC-300 User’s Guide
Page 35
The Card Insertion Annunciator is active.
Modem cards will appear as the next available COM port.
The user selectable I/O window is 300 - 31F.
The user selectable memory window is D000 - D7FF.*
ATA drives will use address 170.
* Card Services uses this memory window for a client driver that
requires a memory window.
To accept the default settings, press
Enter
and continue with the
section titled
Modify the Configuration Files
.
To change any of the settings, press
↓
to move the highlight to Reselect
Install Options, press
Enter
and continue with the next section.
Custom Installation
This section documents the options you can set through custom
installation. The discussions appear in the order you would configure
them.
Choosing the Drive and Directory
INSTALL prompts you to define the drive that will contain the
CardTalk software.
Press
↑
and
↓
to select the drive. When you’ve selected the drive, press
Enter
.
WARNING
Removable Drives
Do not install CardTalk on a removable drive.
INSTALL displays the default subdirectory name: \CARDTALK.
To accept the default, press
Enter
.
To use a different subdirectory,
backspace to erase the default name, type a new name and press
Enter
.
INSTALL creates the requested subdirectory if it does not exist.
The rest of this guide uses \CARDTALK to identify the subdirectory
containing the software. If you installed the CardTalk files in a different
directory, make a note of the directory name in this guide.
Summary of Contents for PC-250
Page 32: ......
