Actidata actiLib Autoloader 4U, User'S And Service Manual

Page: 26 / 103

actiLib Library 4U
– User and Service Guide
Page 26 of 103
6.7 Unpacking the tape Library
Before you begin, clear a work surface to unpack the Library. Select an open 4U rack location allowing
easy access to the host server and an easily accessible power outlet.
IMPORTANT
If the temperature in the room where the Library will be
installed varies by 15º C (30º F) from the room where the
Library was stored, allow the Library to acclimate to the
surrounding environment for at least 12 hours before
unpacking it from the shipping container.
Unpacking the Library:
1. Before opening and removing the Library from the box, inspect the container for shipping damage.
If you notice any damage, report it to the shipping company immediately.
2. Open the box and remove the two rack rails (if included) and set aside.
3. Carefully remove the shipping materials from the top of the Library. Remove the accessory
package and set aside.
4. Lift the Library out of the carton and remove the bag from the Library. Remove the foam cushion
from the back of the Library. Save the packaging materials for future use.
IMPORTANT
Do not place the Library on either end or sides as this
may damage the Library.
6.8 Identifying product components
Confirm that you have received the following:

Library

Terminator (not in all configurations)

SCSI cable (not in all configurations)

Power cord (not in all configurations)

Rack mount kit: (not in all configurations)

2 rack mount rails

1 bag of eight M6 screws for the Rack (9.5 mm square holes in the rack column)

1 bag of eight M6 screws for rack mounting (6.85 mm round holes in the rack column)

2 mounting brackets

4 M3x6 Torx screws to fix the mounting brackets

2 guide pulleys

2 M3x6 Torx screws to fix the guide pulleys

2 M5 screws to secure the mounting brackets to the rack

Documentation CD

Quick Start Guide