actiLib Library 4U
– User and Service Guide
Page 51 of 103
7.9.3 Labeling tape cartridges
Attaching a barcode label to each tape cartridge enables the Library and application software to
identify the cartridge quickly, thereby speeding up inventory time. Make it a practice to use bar
code labels on your tape cartridges. Your host software may need to keep track of the following
information via the associated barcode:
Date of format or initialization
Tape’s media pool
Data residing on the tape
Age of the backup
Errors encountered while using the tape (to determine if the tape is faulty).
IMPORTANT
The misuse and misunderstanding of bar code
technology can result in backup and restore failures. To
ensure that your bar codes meet manufactures quality
standards, always purchase them from an approved
supplier and never print bar code labels your self.
Ultrium tape cartridges have a recessed area located on the front of the cartridge next to the
write-protect switch. Use this area for attaching the adhesive-backed bar code label. Only apply
labels as designated in
Figure 28 Ultrium tape cartridge and proper bar code label placement
IMPORTANT
The bar code label should only be applied as shown in
Figure 26 with the alphanumeric portion facing the hub
side of the tape cartridge. Never apply multiple labels
onto a cartridge, as extra labels can cause the cartridge
to jam in a tape drive.
Summary of Contents for actiLib Autoloader 4U
Page 40: ...actiLib Library 4U User and Service Guide Page 40 of 103 Figure 24 Interaction Mode Commands ...
Page 43: ...actiLib Library 4U User and Service Guide Page 43 of 103 Figure 27 Interaction Mode Service ...
Page 60: ...actiLib Library 4U User and Service Guide Page 60 of 103 Figure 40 Configuration license key ...
