Actidata actiLib Autoloader 4U, User'S And Service Manual

Page: 79 / 103

actiLib Library 4U
– User and Service Guide
Page 79 of 103
8.3 Tape Library error codes
If an error occurs during operation of the Library, the Library stops the current operation and
displays an error code on the LCD screen. Unless otherwise noted in Table 11 on page 84, try
to resolve the error by cycling power to the Library and retrying the last operation. If the error
persists, contact support personnel Support menu tree.
8.3.1 Example error code
EVENT -6
A5 F1
Where:

Sequence number
–6 indicates the position in sequence list, 0 being the most recent.

Log shows a load error (code A5 = fan error, sub code F1 = caused by the fan at the
back connector plate).
The event log with the Library also includes a date stamp for each event. Press Enter to display
the associated timestamp in the following format:
ddd:hh:mm:ss:HH
where:
ddd: days
hh: hours
mm: minutes
ss: seconds
HH: 1/100 second
A description of each error code and possible solution is provided in the following table.
Error Code
Description User Action
80 Barcode Reader Error,
cannot initialize BCR Retry operation; after
several occurrences contact
technical support
81 Barcode Reader Error,
no response from BCR Retry operation; after
several occurrences contact
technical support
82 EEPROM Error,
no response from EEPROM (located on robotic
controller) Retry operation; after
several occurrences contact
technical support
83 Robotic controller generic problem Reset the unit and retry
operation. After several
occurrences contact
technical support
84 Setting of gripper motor parameters failed Reset the unit and retry
operation. After several
occurrences contact
technical support
85 Setting of slider motor parameters failed Reset the unit and retry
operation. After several
occurrences contact
technical support