Actidata actiLib Autoloader 4U, User'S And Service Manual

Page: 100 / 103

actiLib Library 4U
– User and Service Guide
Page 100 of 103
13
Regulatory information
This section describes the tape Library compliance with safety and regulatory agency
standards:
INFORMATION
To comply with the following regulations and standards,
the tape Library must be properly installed in an office or
industrial environment with shielded cables and
adequate grounding of the SCSI bus and the input
power.
13.1 Device Standards

ANSI Small Computer System Interface-2 (SCSI-2), X3.131
– 1994

ANSI SCSI-3 Primary Commands, X3.301 - 1997

ANSI Information and Technology. SCSI-3 Medium Changer Commands (SMC),
NCITS.314:1998

ANSI SCSI Parallel Interface-2 (SIP-2), X3.302:1998

IEC 60297 Rack Standards
Countries Standard (by BDT) European Union CE
USA/Canada FCC, ETL
Germany
GS Semco
13.2 FCC (United States)
The computer equipment described in this manual generates and uses radio frequency (RF)
energy. If the equipment is not installed and operated in strict accordance with the
manufacturer’s instructions, interference to radio and television reception might result.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Tested To Comply
With FCC Standards
For Home or Office
Use