ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
3
Contents
1
1.
Short description
2
2.
Assembly
2
3.
Electrical connection
3
4.
Description of function and operation
4
4.1. Programming software PM-TOOL
5
5.
Setting up the device
6
5.1. Switching on
6
5.2. Standard parameterisation (flat operation level)
6
Value assignment for the control of the signal input
5.3. Programming interlock
„RUN“
9
Activation/Deactivation of the programming interlock or change into professional operation level
/ back into flat operation level
5.4. Extended parameterisation (professional operation level)
9
5.4.1. Signal input parameters „
INP
“
9
Value assignment for the control of the signal input incl. linearisation
5.4.2. General device parameters „
FCT
“
13
Superior device functions like Hold, Tara, min/max permanent, setpoint function respectively
nominal value function, average determination, brightness control, as well as the control of the
digital input and the keyboard configuration
5.4.3. Safety parameters „
COD
“
17
Assignment of user and master code for locking or access to certain
parameters like e.g. analog output and alarms, etc.
5.4.4. Serial parameters „
ser
“
18
Parameter for the definition of the interface
5.4.5. Analog output parameters „
Out
“ and „
OU2
“
19
Analog output functions
5.4.6. Relay functions „
rel
“
22
Parameter for the definition of setpoints
5.4.7. Alarm parameters „
AL1…AL4
“
24
Acutator and dependcies of the alarms
5.4.8. Totaliser (Volume metering) „
tot
“
25
Parameters for the calculation of the sum function
6.
Reset to factory settings
27
Reset parameters to delivery state
7.
Alarms / Relay
28
Functional principle of the switching outputs
8.
Interfaces
29
Connection RS232 and RS485
9.
Sensor alignment
30
Functional sequence scheme for sensors with existing adjustable resistor
10.
Technical data
31
11.
Safety advices
33
12.
Error elimination
34
