ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
28
5. Setting up the device
26
Totaliser reset,
tot.re:
Default:
000
The reset value is adjusted from the smallest to the highest digit with the navigation keys
[
▲
] [
▼
]
and digit per digit confirmed with
[P]
. After the last digit, the display switches back to
the menu level. The activator for the reset is parameter driven via the 4
th
key or via the optional
digital input.
Setting up the decimal point for the totaliser,
tot.dt:
Default:
0
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
. With
[P]
the
selection is confirmed and the device changes into menu level.
Totaliser factor,
Facto
:
Default:
10
Π
0
At this the factor (10
0
…10
6
) respectively the divisor for the internal calculation of the measuring
value is assigned.
Time base,
t.base:
Default:
sec
Under this parameter the time base of the measurement can be preset in seconds, minutes or
hours.
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„–tot–“
.
Parameterisation level
Menu level
…
